JVS-S11-8P-120W
8Port PoE Network Switch
Message
Features
Specification
Accessories
Download

Product Description:

JVS-S11-8P-120W hybrid standard PoE power supply switch provides 8 10/100M adaptive RJ45 ports, 2 10/100/1000M adaptive RJ45 ports, and 1 independent SFP expansion slot. Ports 1 to 8 provide PoE power supply and can serve as Ethernet power supply devices.

All PoE ports can automatically detect and identify electrical devices that comply with IEEE 802.3af/at standards and supply power to them through network cables.

This model supports intelligent AI detection. When the monitoring device crashes or the network is abnormally interrupted, the AI algorithm is used to determine the intelligent restart of the POE port device.

Support automatic network optimization: automatically judge the status of network signal transmission, intelligent switch mode, long distance transmission is stable without disconnection.

Product Characteristics:

  • Comply with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet protocol standards;.

  • Support IEEE 802.3af/at standard, compatible with PD that supports IEEE 802.3af/at.

  • Support normal switch/automatic AI detection + port isolation (combined function) two mode.

  • Provides 8 10/100m adaptive PoE power supply ports, 2 uplink 10/100/1000M adaptive RJ45 ports, and 1 independent SFP port.

  • All ports support the Auto MDI/MDI-X function.

  • Supports IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control.

  • All ports have wire-speed forwarding capability.

  • Supports MAC address self-learning and aging.

  • Full metal casing, full load 120W.

  • Plug and play


Software Specifications

  • Complies with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet protocol standards.

  • Compliant with IEEE 802.3af/at standards for receiving devices (PD).

  • Compatible with certified non-standard electrical receiving equipment (PD).

  • Store and forward.

  • MAC automatic learning and aging.

  • IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control.




Hardware Specifications:
Port100M PoE8
1000M Cascade RJ452
1.5G standard SFP port1
Function Storage and ForwardingSupport
Exchange Content7.6G
MAC Address2K
Use Environment

Working temperature: 0 ℃ ~ 40 

Storage temperature: -40 ℃ ~ 70 ℃

Working humidity: 10% ~ 90% RH does not condense

Storage humidity: 5% ~ 90% RH does not condense

PoE Standard

Standard IEEE802.3af/at single port maximum power 30

WSupport overcurrent, overvoltage, short-circuit protection

Support for High Power PD soft start

Support sequential boot

Input Power SupplyAC input 100-250V, standard 100W/120W power supply
Supported Standards & Protocols                           

IEEE 802.3 Ethernet Media access Control Protocol IEEE 802.3i 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000Base-T Gigabit Ethernet

IEEE802.3z 1000Base-X SFP interface

IEEE 802.3af implements power supply for Ethernet devices through Ethernet data cable pairs or devices

IEEE 802.3at implements high power supply for Ethernet devices through Ethernet data cable pairs or devices

IEEE 802.3x flow control

System Mode

OFF : Default working mode

ON : AI+ Intelligent long distance transmission

 Data Signaling Rate

Ethernet 10Mbps half-duplex, 20Mbps full duplex

Fast Ethernet 100Mbps half-duplex, 200Mbps full duplex

Gigabit Ethernet 2000Mbs full duplex

Network Medium

1000Base-T: 4 pairs Cat5e or more UTP/STP(≤100m)

100Base-TX: 2 pairs Cat5 or more UTP/STP (≤ 100m)

10Base-TX: 2 pairs Cat5 or more UTP/STP (≤ 250m)

Physical SpecificationProduct size: 190mmx140mmx43mm (LxWxH)

Message

Submit

Recommend