Ans: 

1. Setup Motion Detection in CloudSEE2.0 NVR

Right click on the video preview screen and select Main Menu. Login with username and password. Then click Alarm icon. Motion detection window will open.

The IP cameras added in the NVR will listed there. Enable the button under status to enable the motion detection. Next step is to select the motion detection region. Click on the region icon and draw the region and the set the motion detection sensitivity. After set the sensitivity, choose the alarm action, you can set basic settings like Send to Client, Send Alarm Email, With Snapshot and Start Alarm Recording. 

Once you set the alarm action, you can schedule the alarm if you required. By default, its 24x7. After all this, you set the motion detection configured successfully. 

2.Setup Motion Detection in CloudSEE1.0 NVR

Right click on the video preview screen and select System Setup. Login with username and password.

Then click Alarm and then MD (Motion Detection). Tick the desired channel to enable the motion detection. Then click Set button to select the region and sensitivity. Once you set the region and motion detection sensitivity, save the settings.

And then click Set button under Alarm Output column. You can set basic settings like Send to Client, Email Alert, Send Snapshot and Start to Record.

Once you set the alarm output, you can schedule the alarm if you required. Go to Alarm Task and set the schedule. By default, its 24x7. After all this, you set the motion detection configured successfully.

3.Setup recording only on motion detection on CloudSEE2.0 NVR

Right click on the video preview screen and select Main Menu. Login with username and password. Then click Record icon. In the record menu, disable all the Auto options and save the settings. The NVR will record only on motion detection. This will save more HDD space.

4.Setup recording only on motion detection on CloudSEE1.0 NVR

Right click on the video preview screen and select Record Setup. Login with username and password. Then disable all the All Day and save settings. Then the NVR will record only on motion detection. This will save more HDD space.